Processing Conditions

The temperatures and processing conditions listed here are intended as guidelines for molders and designers. In some cases, relatively broad ranges are necessary to accommodate variations in compound formulas.

Injection molding is a complex science; best results may only be achieved after several trials. RTP Company's technical support specialists can assist you with determining optimum settings for your unique compound.

RTP 100 Series
Polypropylene (PP)
RTP 200 Series
Nylon 6/6 (PA)
RTP 200 A Series
Nylon 6 (PA)
RTP 200 B Series
Nylon 6/10 (PA)
RTP 200 C Series
Nylon 11 (PA)
 
RTP 200 D Series
Nylon 6/12 (PA)
RTP 200 E Series
Amorphous Nylon (PA)
 
RTP 200 F Series
Nylon 12 (PA)
RTP 200 G Series
Nylon 4/6 (PA 4/6)
 
RTP 200 H Series
Impact Modified Nylon 6/6 (PA)
RTP 200 K Series
Polyarylamide (PARA)
 
RTP 300 Series
Polycarbonate (PC)
RTP 400 Series
Polystyrene (PS)
RTP 500 Series
Styrene Acrylonitrile (SAN)
RTP 600 Series
Acrylonitrile Butadiene Styrene (ABS)
RTP 700 Series
High Density Polyethylene (HDPE)
RTP 700 A Series
Low Density Polyethylene (LDPE)
 
RTP 800 Series
Acetal (POM)
RTP 900 Series
Polysulfone (PSU)
 
RTP 1000 Series
Polybutylene Terephthalate (PBT)
RTP 1100 Series
Polyethylene Terephthalate (PET)
RTP 1100 A Series
Modified Polyethylene Terephalate Glycol (PETG)
  • Specialty Compounds
 
RTP 1200 M Series
Thermoplastic Polyurethane Elastomer (TPUR)
RTP 1200 S Series
Ester-based Thermoplastic Polyurethane Elastomer (TPUR)
RTP 1200 T Series
Ether-based Thermoplastic Polyurethane Elastomer (TPUR)
RTP 1300 Series
Polyphenylene Sulfide (PPS)
RTP 1400 Series
Polyethersulfone (PES)
RTP 1500 Series
Polyether-Ester Block Copolymer
Thermoplastic Elastomer (TEEE)
RTP 1700 Series
Modified Polyphenylene Oxide (PPO)
 
RTP 1800 Series
Acrylic (PMMA)
RTP 1800 A Series
Polycarbonate/Acrylic Alloy (PC/PMMA)
RTP 2100 Series
Polyetherimide (PEI)
RTP 2200 Series
Polyetheretherketone (PEEK)
RTP 2200 A Series
Polyetherketone (PEK)
 
RTP 2300 A Series
Rigid Thermoplastic Polyurethane (RTPU)
RTP 2300 C Series
Rigid Thermoplastic Polyurethane (RTPU)
 
RTP 2500 Series
Polycarbonate/ABS Alloy (PC/ABS)
RTP 2700 S Series
Saturated Styrenic Block Copolymer
Thermoplastic Elastomer (TES)
 
RTP 2700 U Series
Unsaturated Styrenic Block Copolymer
Thermoplastic Elastomer (TES)
 
RTP 2800 Series
Thermoplastic Polyolefin Elastomer (TEO)
RTP 2800 B Series
Thermoplastic Vulcanizate Elastomer (TPV)
  • Specialty Compounds
 
RTP 2900 Series
Polyether-Block-Amide Thermoplastic Elastomer (COPA)
  • Specialty Compounds
 
RTP 3000 Series
Polymethylpentene (PMP)
 
RTP 3100 Series
Perfluoroalkoxy (PFA)
 
RTP 3200 Series
Ethylene Tetrafluoroethylene (ETFE)
 
RTP 3300 Series
Polyvinylidene Fluoride (PVDF)
RTP 3400—3 Series
Liquid Crystal Polymer (LCP)
 
RTP 3400—4 Series
Liquid Crystal Polymer (LCP)
 
RTP 3500 Series
Fluorinated Ethylene Propylene (FEP)
 
RTP 4000 Series
Polyphthalamide (PPA)
RTP 4000A Series
Hot Water Moldable Polyphthalamide (PPA)
 
RTP 4100 Series
Polyetherketoneketone (PEKK)
 
RTP 4200 Series
Thermoplastic Polyimide (TPI)
 
RTP 4300 Series
Polysulfone/Polycarbonate Alloy (PSU/PC)
 
RTP 4400 Series
High Temperature Nylon (HTN)
 
RTP 4600 Series
Syndiotactic Polystyrene (SPS)
  • Specialty Compounds
 
RTP 4700 Series
Polytrimethylene Terephthalate (PTT)
RTP 6000 Series
Specialty Thermoplastic Elastomer (TPE)

PermaStat® is a registered trademark of RTP Company