[RTP Company]

Product Data Sheet &
General Processing Conditions

RTP 199 X 134518
Polypropylene (PP)

Glass Fiber

Flame Retardant


Impact Strength, Izod 
    notched 1/8 in (3.2 mm) section 2.2 ft-lbs/in  117 J/m  D 256
    unnotched 1/8 in (3.2 mm) section 10.0 ft-lbs/in  534 J/m  D 4812
Tensile Strength 8500 psi  59 MPa  D 638
Tensile Modulus 0.95 x 10^6 psi  6550 MPa  D 638
Flexural Strength 14500 psi  100 MPa  D 790
Flexural Modulus 0.95 x 10^6 psi  6550 MPa  D 790
Data herein is typical and not to be construed as specifications.
Unless otherwise specified, all data listed is for natural or black colored materials. Pigments can affect properties.
* This rating is not intended to reflect hazards of this or any other material under actual fire conditions.
** Values per RTP Company testing.

 English SI Metric  
Injection Pressure10000 - 15000 psi 69 - 103 MPa  
Melt Temperature375 - 450 °F 191 - 232 °C  
Mold Temperature90 - 150 °F 32 - 66 °C  
Drying2 hrs @ 175 °F 2 hrs @ 79 °C  


7 Apr 2014 JSD

This information is intended to be used only as a guideline for designers and processors of modified thermoplastics. Because design and processing is complex, a set solution will not solve all problems. Observation on a “trial and error” basis may be required to achieve desired results.

Data are obtained from specimens molded under carefully controlled conditions from representative samples of the compound described herein. Properties may be materially affected by molding techniques applied and by the size and shape of the item molded. No assurance can be implied that all molded articles will have the same properties as those listed.

No information supplied by RTP Company constitutes a warranty regarding product performance or use. Any information regarding performance or use is only offered as suggestion for investigation for use, based upon RTP Company or other customer experience. RTP Company makes no warranties, expressed or implied, concerning the suitability or fitness of any of its products for any particular purpose. It is the responsibility of the customer to determine that the product is safe, lawful and technically suitable for the intended use. The disclosure of information herein is not a license to operate under, or a recommendation to infringe any patents.

RTP COMPANY • 580 EAST FRONT STREET • WINONA, MN 55987 • 507-454-6900