Aufstellungsort-Inhalt    (Aufstellungsort-Navigation)

Polymermatrices

Die Entwicklung und Herstellung von Spezialitätencompounds ist eine exakte und doch kreative Wissenschaft. RTP veredelt die unten angegeben Polymere mit einer Vielzahl von Additiven und Verstärkungsmitteln. Dabei entstehen außergewöhnliche Werkstoffe, die die Anforderungen an die Bauteile in konstruktiver und optisch-qualitativer Hinsicht erfüllen.

RTP
Serie
Kunststoff   Modifikationen
100 Polypropylen (PP) [•] [•] [•] [•] [•]
200 Polyamid 66 (PA 6/6) [•] [•] [•] [•] [•]
200 A Polyamid 6 (PA 6) [•] [•] [•] [•] [•]
200 B Polyamid 610 (PA 6/10) [•] [•] [•] [•] [•]
200 C Polyamid 11 (PA 11) [•] [•] [•] [•] [•]
200 D Polyamid 612 (PA 6/12) [•] [•] [•] [•] [•]
200 E Polyamid, amorph (PA) [•] [•] [•] [•] [•]
200 F Polyamid 12 (PA 12) [•] [•] [•] [•] [•]
200 H Polyamid 66 schlagfest modifiziert (PA 6/6) [•] [•] [•] [•] [•]
300 Polycarbonat (PC) [•] [•] [•] [•] [•]
400 Polystyrol (PS) [•] [•] [•] [•] [•]
500 Styrol-Acrylnitril-Copolymerisat (SAN) [•] [•] [•] [•] [•]
600 Acrylnitrilbutadienstyrol (ABS) [•] [•] [•] [•] [•]
700 Polyethylen High Density (HDPE) [•] [•] [•] [•] [•]
700 A Polyethylen Low Density (LDPE) [•] [•] [•] [•] [•]
800 Polyoxymethylen (POM) [•] [•] [—] [•] [•]
900 Polysulfon (PSU) [•] [•] [•] [•] [•]
1000 Polybutylenterephthalat (PBT) [•] [•] [•] [•] [•]
1100 Polyethylenterephthalat (PET) [•] [•] [•] [•] [•]
1200 S Ester-gegründet Thermoplastisches
Polyurethan-Elastomer
(TPUR) [•] [•] [•] [•] [•]
1200 T Äther-gegründet Thermoplastisches
Polyurethan-Elastomer
(TPUR) [•] [•] [•] [•] [•]
1300 Polyphenylensulfid (PPS) [•] [•] [•] [•] [•]
1400 Polyethersulfon (PES) [•] [•] [•] [•] [•]
1500 Thermoplastisches Polyether-Ester-
Blockcopolymer-Elastomer
(TEEE) [•] [•] [•] [•] [•]
1700 Polyphenylenoxid modifiziert (PPO) [•] [•] [•] [•] [•]
1800 Polymethylmethacrylat (PMMA) [•] [•] [•] [•] [•]
1800 A Polycarbonat/Polymethacrylat-Legierung (PC/PMMA) [•] [•] [•] [•] [•]
2000 Kundenspezifische Legierungen   [•] [•] [•] [•] [•]
2100 Polyetherimid (PEI) [•] [•] [•] [•] [•]
2200 Polyetheretherketon (PEEK) [•] [•] [•] [•] [•]
2200 A Polyetherketon (PEK) [•] [•] [•] [•] [•]
2300 Polyurethan Hartkunststoff (RTPU) [•] [•] [•] [•] [•]
2500 Polycarbonat/ABS-Legierung (PC/ABS) [•] [•] [•] [•] [•]
2700 Styrol-Blockcopolymer-Elastomere (TES) [•] [•] [•] [•] [•]
2800 Thermoplastisches Polyolefin-Elastomer (TEO) [•] [•] [•] [•] [•]
2900 Thermoplastisches Polyether-
Blockamid-Elastomer
(COPA) [•] [•] [•] [•] [•]
3000 Polymethylpenten (PMP) [•] [—] [•] [•] [•]
3100 Perfluoro-Alkoxyalkan-Copolymer (PFA) [•] [•] [•] [—] [•]
3200 Ethylen-Tetrafluoroethylen-Copolymer (ETFE) [•] [•] [•] [—] [•]
3300 Polyvinylidenfluorid (PVDF) [•] [•] [•] [—] [•]
3400 Liquid Crystal Polymer (LCP) [•] [•] [•] [•] [•]
3500 Polyfluorethylenpropylen (FEP) [•] [•] [•] [—] [•]
4000 Polyphthalamid (PPA) [•] [•] [•] [•] [•]
4000 A Heißwasser Moldable Polyphtalamide (PPA) [•] [•] [•] [•] [•]
4100 Polyetherketonketon (PEKK) [•] [•] [•] [•] [•]
4200 Polyimid-Thermoplast (TPI) [•] [•] [•] [•] [—]
4300 Polysulfon/Polycarbonat Legierung (PSU/PC) [•] [•] [•] [•] [•]
4400 Polyamid Hochtemperatur (HTN) [•] [•] [•] [•] [•]
4700 Polytrimethylenterephthalat (PTT) [•] [•] [•] [•] [•]
6000 Spezialgebiet Thermoplastisches Elastomer (TPE)         [•]
RTP
Serie
Kunststoff  
Modifikationen
Deutscher Produktleitfaden zum Herunterladen

Eine druck- oder speicherbare Version des RTP Produktleitfadens steht im PDF-Format zur Verfügung. Zum Betrachten von PDF-Dateien muss das Programm Acrobat Reader installiert sein.